International Chemical ID: InChI=1S/C2H4O2/c1-2(3)4/h1H3,(H,3,4)
Chemical Formula: C2H4O2
Synonyms: acetic acid|ethanoic acid|157090-22-7|207004-55-5|9035-69-2|64-19-7|68475-71-8|77671-22-8|Vinegar acid|71251_FLUKA|45727_FLUKA|34255_RIEDEL|34256_RIEDEL|A9967_SIAL|CH3-COOH|CHEBI:15366|ethoic acid|ACY|380121_SIAL|338826_SIAL|LS-1541|Acetasol (TN)|Acetic acid (JP15/NF)|Acetic acid, glacial (USP)|D00010|A6283_SIAL|33206_RIEDEL|40273_RIEDEL|07692_FLUKA|34254_RIEDEL|33209_RIEDEL|45730_FLUKA|NCIOpen2_000659|W200603_ALDRICH|Carboxylic acids, C2-3|W200611_ALDRICH|45732_FLUKA|Acetic acid, propionic acid distillate|Acetic acid, aqueous solution|Acetic acid, diluted|Acide acetique|Acido acetico|Azijnzuur|Essigsaeure|NSC132953|Octowy kwas|WLN: QV1|40209_RIEDEL|Pyroligneous acid|ACT|C00033|Glacial acetic acid|537020_SIAL|46928_SUPELCO|318590_ALDRICH|38050_RIEDEL|NSC406306|38051_RIEDEL|LS-2535|A8976_SIAL|49199_FLUKA|NCIOpen2_000682|242853_SIAL|CARBOXYMETHYL GROUP|CBM|320099_SIAL|Glacial acetic acid (JP15)|LMFA01010002|27218_RIEDEL|InChI=1/C2H4O2/c1-2(3)4/h1H3,(H,3,4|13669_FLUKA|Acetate standard for IC|Acetic acid solution|27225_RIEDEL|ST5213882|HSDB 40|Cellulose diacetate [USAN]|Cellulose, diacetate|cellulose diacetate|Octowy kwas [Polish]|4-02-00-00094 (Beilstein Handbook Reference)|AI3-02394|Acetasol|Acetic acid (natural)|Acetic acid [JAN]|Acetic acid solution, not less than 50% but more than 80% acid, by mass [UN2790] [Corrosive]|Acetic acid solution, with more than 10% and less than 50% acid, by mass [UN2790] [Corrosive]|Acetic acid, glacial|Acetic acid, glacial or acetic acid solution, >80% acid, by mass [UN2789] [Corrosive]|Acetic acid, of a concentration of more than 10 per cent, by weight, of acetic acid|Acetic acid, water solutions|Acide acetique [French]|Acido acetico [Italian]|Azijnzuur [Dutch]|BRN 0506007|CCRIS 5952|Caswell No. 003|EINECS 200-580-7|EPA Pesticide Chemical Code 044001|Essigsaeure [German]|Ethylic acid|FEMA No. 2006|FEMA Number 2006|45725_FLUKA|Kyselina octova [Czech]|Methanecarboxylic acid|NSC 132953|45754_FLUKA|Otic Tridesilon|45726_FLUKA|UN2789|UN2790
All test results quoted are from testing carried out at independent laboratories to the relevant {ASTM/CE} Standard(s). Unless stated otherwise tests are carried out on samples of the relevant protective material as opposed to finished garments. Note that all testing is conducted at specific temperatures according to ASTM or EN standard requirements. As permeation is affected by temperature it is important to consider the likely temperature in any application. Permeation test results record a time to a specific permeation rate as defined by the relevant standard and NOT a time to initial breakthrough of the chemical. Also note that differences may be apparent in some cases between CE and ASTM test results. Whilst the tests are similar, the CE standard records a time to a permeation rate of 1.0µg / min / cm2, whilst ASTM records a time to a permeation rate of 0.10µg / min / cm2. This may explain differences between results. As with all Personal Protective Equipment, selection should be based upon the end users risk assessment, it is the responsibility of the end user to determine the suitability of any PPE as part of this risk assessment and to comply with any/all legislative/governmental requirements. Contact Lakeland for more information.
Contact Us
Fill out the form below, and we will be in touch shortly.