Choosing FR Winter Workwear

HardHat_SnowWith any change of season, there are new inherent hazards that directly affect worker health and safety.

In winter months, decreasing temperatures and wind chill put outdoor workers at risk for hypothermia and frostbite, other dangers include decreased mobility, slower response times and slippery surfaces.

Additionally, it has been found that diligence with wearing FR protective clothing over warmer winter wear may diminish during the winter months.

For these reasons, it is essential that a winter Personal Protective Equipment (PPE) plan be established for employees working in areas where they may be exposed to hazardous materials, arc flash or other conditions that require FR wear.

Here are 7 tips to help you choose the right FR protective wear to stay safe this winter:

1. Stay on Top Of the Forecast

When we think about staying safe on a job site, the weather forecast may not be the first factor that comes to mind. However, winter conditions and cold weather present dangerous situations not only with slippery ice and snow, but also reduced mental alertness and manual dexterity.

Staying informed of the possible changing conditions that you might encounter during the course of your workday will, no doubt, keep you safer and better protected. Learn more about the benefits of a cold-weather layering system and what qualities to look for in FR/AR clothing.

2. Keep Dry to Avoid Body Heat Loss and Injuries Associated with Potential Arc Flash

rain-coatIn addition to being uncomfortable, wet clothing will cause you to lose more body heat. You also face a greater risk from moisture seeping through layers. Once the clothing next to your skin becomes moist, it offers a path for an arc flash to travel. Use appropriate rain gear and have a change of FR wear available for emergencies. Workers who are exposed to electrical hazards should not wear synthetic materials that can melt.

FR/AR garments with moisture-wicking fibers to help pull moisture away from your body can help keep you warmer, drier and more protected. The balance of insulation, warmth and breathability should not be overlooked. Choosing the right garments for your application and environment can make a big difference in both safety and performance. Learn the benefits of choosing FR/AR clothing with permanent moisture-wicking fibers to help keep you safe.

3. Protect Your Eyes

Eye protection in winter is for more than keeping debris or chemicals out of your eyes. Icy blasts from harsh winds can irritate eyes and cause decreased visibility. While working in hazardous environments, the use of face covers in addition to protective eye wear may be needed under certain conditions.

4. Cover Your Head, Hands, and Feet

Your body loses about 10-percent of your heat through your head. While it is important to keep your head warm, you must also be sure your hard hat is properly fit and that hats or liners do not cause slippage.

Choose a hat or liner that covers the back of your neck as well as your head. Consider getting a slightly larger hard hat for winter wear to accommodate the necessary head coverings.

Protecting your arms and hands is also critically important for job effectiveness and worker safety. Frostbite to your hands and feet can occur rapidly. You should consider additional liners for gloves and boots. These will provide you with extra warmth and you can change the liners if they become damp. If you are required to wear protective gloves, liners should be made of suitable material that will not melt in the incident of arc flash – such as Merino wool.

As you search for the right hand and arm protection, look for reusable and washable products that offer anti-microbial and cut resistance designs, and heat and chemical resistance in lightweight and heavyweight options.

5. Take Predetermined Breaks in Warm Areas

During extremely cold weather, workers should take warming breaks at regular intervals. Access to warm beverages should be included, but caffeine should be avoided. Even if you can only take a break in a tent area, or the cab of your work truck, getting out of the cold and wind will allow your body to warm.

Remember that high winds create a wind chill factor that reduces the working temperature to less than what a thermometer may show.

General guidelines recommend 10 minutes of warming after two hours of work. After the second two hours, a half hour is recommended. Extreme conditions may require shorter work intervals.

6. Keep FR Clothing Clean

When your FR clothing becomes contaminated with oil, dirt or debris, you must clean it according to the manufacturer’s instructions. Allowing chemicals and oil to build up on your protective wear increases your risk of injury. You may think you are protected when in fact oils and chemicals may ignite easily.

Use gentle washing processes, including warm, not hot, water and mild detergent.

Bleach is not recommended as it will tend to break down the resistance of the materials. Store your gear carefully as well. Crumpling dirty garments and leaving them for days will reduce the garment’s lifespan.

7. Keep PPE Well Maintained So It Retains All Its Protective Properties

Your FR PPE is designed to take care of you. For it to perform properly, you must take care of it as well.

When you follow the use and care instructions provided by the FR clothing manufacturer, you can expect to get the full service life from your FR products. During winter, you may need to change garments frequently if you are working in snowy or muddy conditions.

The most important factor in choosing appropriate PPE for the winter season is to select clothing that is not only suitable for the temperature in which you will be working, but is also functional for the work you will be performing and the physical exertion required. Always follow the legal requirements for your trade and consult relevant sections of NFPA codes and standards.

Did you know? Lakeland offers a layering system with permanent moisture wicking technology in every single layer. From base layer to button up shirt, hoodie to outer jacket, Lakeland’s layering system offers moisture wicking technology that will never wear out, wash out, or stop performing for you.

Superior Performance, Protection, and Comfort.



Continue Reading

Contact Us
Fill out the form below, and we will be in touch shortly.