Rear entry encapsulating suit with 20mil PVC visor, stitched and taped sealed seams, flat back, air-inlet pigtail, attached socks with boot overflaps and supported by Permasure‚®. EN Type 3 liquid jet spray and Type 4 liquid spray chemical protection. Multi-layer barrier film ChemMax‚® 3 fabric offers high level permeation resistance against many dangerous chemicals. Permeation resistance tested to over 130 chemicals, it also works with Permasure‚®, Lakeland's easy-to-use smart-phone app that calculates safe-wear times for over 4000 chemicals, accounting for the effect of temperature on permeation rate and chemical toxicity. The fabric co-extrusion production process results in a low noise, flexible and smooth finish that is more fabric-like and has no bonding dimples where a chemical might cling as commonly seen in many chemical suit fabrics. Infectious Agent Barrier – passes all four EN 14126 bio-hazard tests at the highest classes. Spacious and generous design for comfort and freedom of movement. This suit provides Type 3 & 4 chemical splash & spray protection. Certified to EN 1149-5 for static dissipative clothing. This is not a gas-tight suit and is not suitable for protection against hazardous gasses and vapors. It is not suitable for use with a compressed air supply but should be used with a full face mask inside the suit.
| Garment Type | Coverall |
|---|
Our Safe-Wear Time assessment indicates an effective maximum period a suit may be worn in a specific application before possible leakage may result in harm to the wearer, based on a total inward leakage derived from both fabric permeation and possible suit inward leakage, on the parameters of your application (such as temperature) and on the defined toxicity thresholds (TL’s shown in the tab above) for the chemical.