Disposable and Chemical Protective Clothing
English
SafeGard SMMS
SafeGard® SMMS garments feature a CE-certified global pattern and can be used in work environments where hazardous or non-hazardous contaminants may be present.
The two outer layers of the SafeGard® SMMS garment are made of spunbonded polypropylene filaments that stand up to tearing and abrasion, while the inner layer is composed of melt-blown polypropylene microfibers that filter out potentially harmful particulates and liquids. SafeGard® SMMS enhances the level of breathability while combining effective protection from liquid and dust repellency.
Safegard® SMMS is offered in blue and white configurations with either serged or bound seams for a variety of applications.
Please Note:
All test results quoted are from testing carried out at independent laboratories to the relevant {ASTM/CE} Standard(s). Unless stated otherwise tests are carried out on samples of the relevant protective material as opposed to finished garments. Note that all testing is conducted at specific temperatures according to ASTM or EN standard requirements. As permeation is affected by temperature it is important to consider the likely temperature in any application. Permeation test results record a time to a specific permeation rate as defined by the relevant standard and NOT a time to initial breakthrough of the chemical. Also note that differences may be apparent in some cases between CE and ASTM test results. Whilst the tests are similar, the CE standard records a time to a permeation rate of 1.0µg / min / cm2, whilst ASTM records a time to a permeation rate of 0.10µg / min / cm2. This may explain differences between results. As with all Personal Protective Equipment, selection should be based upon the end users risk assessment, it is the responsibility of the end user to determine the suitability of any PPE as part of this risk assessment and to comply with any/all legislative/governmental requirements. Contact Lakeland for more information.