OSX® Fire Fighting Suit
If you’re interested in availability, please speak with a Lakeland product specialist or your local distributor.
Product Features
- The neck buckle adopts a surrounding design, which can be well connected with helmets, shields, and air respirator masks.
- There is a flashlight loop on the right side of the chest.
- Two-piece curved sleeves designed according to the temporary movement range of the hand and ergonomic principles.
- The design of underarm triangular gussets prevents the jacket from being pulled up.
- Elastic knitted flame-retardant cuffs are designed to prevent high-temperature small objects or burning ashes from falling into the cuffs.
- Kevlar cuffs (with thumb holes).
- Jacket pockets (with drain holes).
- “Easy-to-grasp” type DRD (drag rescue device) can be easily grasped with one hand.
- 5cm long 3M high-visibility reflective tape, which is striking for warning.
- Four-piece (panel) cutting design.
- Seams are sewn with 8-10 stitches per inch with double needles.
- Trouser lining inspection hole.
- There is a Nomex tension twill webbing on both sides of the waist, which can adjust the fit of the trousers.
- There are 2 pockets on the side of the pant legs, which can hold rescue tools.
- Diamond-shaped three-piece crotch design, which can absorb crotch pressure and increase wear resistance.
- Knee reinforcement patches increase water resistance and wear resistance.
- The end of the pant legs is sewn with water-resistant fabric to prevent water siphonage.
- 7.5cm long 3M high-visibility reflective tape, which is striking for warning.
- 8-point back X-shaped suspenders.
Main Applications
- Fire fighting
- Emergency rescue
Additional information
