SafeGard 76 Coverall with elasticated hood, cuffs, waist and ankles and bound seams

Style Number: ES428Translations

Breathable Type 5 & 6 coverall constructed with 55gsm 4-layer SMMS fabric – featuring a double layer of melt-blown fibre (“MM”) to enhance hazardous dust protection whilst maintaining a high comfort level.

  • Coverall with elasticated hood,cuffs, waist and ankles
  • Seams are exterior stitched and bound with coated fabric to improve strength and particle filtration.
  • Fabric air-permeability is over 10 times greater than flash-spun polyethylene and microporous film laminated resulting in much higher comfort level for users.
  • Lakeland “Super-B” ergonomic styling – unique combination of three design elements to optimise fit, durability and freedom of movement

Features: Elasticated hood, waist, cuffs and ankles, Individually vacuum packed, "Super B“ pattern, Zip flap

Colors
Sizes
SM - 3XL
Case Size
25/case
Seam
Bound

Resources

SafeGard® 76 Physical Properties
Physical PropertyTest MethodUnitsTest Results
Abrasion ResistanceEN 530>100 cycles/Class 1
Burst StrengthISO 2960207kPa / Class 3
Flex Cracking ResistanceISO 7854100,000 flexes/Class 6
Hydrostatic HeadISO 811 n/a
Puncture ResistanceEN 8638.2N / Class 1
Resistance to IgnitionEN 13274-4  Pass / n/a
Seam StrengthEN 5082120.73N / Class 3
Tensile Strength - cdISO 1393444.7N / Class 1
Tensile Strength - mdISO 1393496.6N / Class 2
Trapezoidal Tear - cdEN 907324.5N / Class 2
Trapezoidal Tear - mdEN 907347.6N / Class 3
Trapezoidal Tear - meanEN 907350.1N / Class 3

Physical properties data is based on standard tests required by CE certification designed to allow easy comparison of the strength, durability and robustness of different garments. Lakeland's "Guide to Type 5 & 6 Coveralls" contains easy reference comparison tables of Lakeland garments with main competitors. A glossary with brief explanation of these tests can be found in Lakeland’s “Guide to Chemical Suit Selection”.

SafeGard® 76 Chemical Penetration Data
Chemical TestCAS NumberPhysical StateTest Results
Butan-1-olLiquidNot tested
o-XyleneLiquidNot Tested
Sodium Hydroxide 10%LiquidR = Class 3 / P = Class 3
Sulphuric Acid 30%LiquidR = Class 3 / P = Class 3

Penetration is the process by which a liquid (or dust) will pass through the fabric via holes or gaps in its structure. It is generally measure using visual methods and is suitable for garments designed to protect against low hazard chemical such as paints and light cleaning fluids. Penetration Data shown For CE garments relates to the liquid Penetration/Repellency test EN 6530 (previously EN 368) required by the Type 6 standard EN 13034.

This test, also known as the “Gutter Test”; places a sample of fabric in a “gutter” suspended at 45o. The liquid is dripped onto the fabric and two figures are recorded; the percentage of the liquid that runs off the fabric (the % Repellency), and the percentage of the liquid that penetrates through the fabric (the % Penetration)
Four chemicals may be tested (Sulphuric Acid 30%, Sodium Hydroxide 10%, Butan-1-ol and o-Xylene) and results are classified according to the following tables (found in EN 14325):-
Repellency: Class 1: >70%, Class 2: >80%, Class 3: >90%
Penetration: Class 1: <10%, Class 2: <5%, Class 3: <1%
(Note, The Repellency class thresholds were changed in the 2018 version of the classification standard (EN 14325). The previous thresholds were:
Class 1: >80%, Class 2: >90%, Class 3: > 95%. The explanation given was for reason of statistical uncertainty in results)

The Type 6 standard requires that:-
- For Repellency a Class 3 shall be obtained on at least one of the four chemicals, and
- For Penetration a Class 2 shall be obtained on at least one of the four chemicals