StaticSorb Electrostatic Protective Wear

Designed to Control Electrostatic Contamination

StaticSorb® Coveralls from Lakeland's Woven Products Division are quality garments designed to control electrostatic contamination. They are worn in food or paint rooms, throughout the electronics assembly and pharmaceutical industries, and in locations where static electricity build-up may cause costly defects. Our StaticSorb® Coveralls provide a non-linting barrier between contaminants and clean rooms.

New StaticSorb® Protective Wear Dissipates Static Electricity!

Lakeland Woven Products Division recently developed StaticSorb® protective wear as the most effective solution to electrostatic buildup problems that can cause costly contamination in paint or electronic clean rooms, laboratories and pharmaceutical production sites.

StaticSorb® Protective Wear has no raw edges, so chance of loose fiber contamination is zero. Features include double lap felled seams, zipper and/or snap closures, and comfortable breathability. Durable, StaticSorb® Protective Wear stands up to two years of industrial laundering. Available in a full range of sizes, and according to the material selected, in white, royal, navy or blue.

Coverall, Style C200

StaticSorb® coverall with knit vents at back yoke, upper sides and inseams, swing pocket with pass-thrus, one upper chest pocket with flap, one hip pocket with flap, mandarin collar with snap adjustment, elastic back waist with snap adjust side tabs, snap adjustment on wrists and ankles, double needle lap felled seams, zipper front.

Sizes: S, M, L, XL, XXL

Coverall, Style C210
Chemstat® coverall with knit vents at back yoke and crotch, swing pockets with pass-thrus, one chest pocket with flap, one hip pocket with flap, mandarin collar with snap adjustment, elastic back waist with snap adjust side tabs, snap adjustment on ankles, hook and loop adjustment on wrists, double needle lap felled seams and zipper front.

Coverall, Style C220
StaticSorb® coverall with 2 way coil zipper, snap adjustment at sleeves and leg hems.

Coverall, Style C230
StaticSorb® coverall with elastic back, snap adjustment at wrists and ankles.

Shirt and Pants,
Style C240/250
StaticSorb® pullover shirt with placket front, snap closures, inner chest pocket with flap, flap snap adjustments on wrists, knit vent on yoke and sides. Pants have swing pockets with flaps, knit vent at inseams, snap adjustments on leg hems.

Sizes: S, M, L, XL, XXL

Sizes: S, M, L, XL, XXL

Sizes: S, M, L, XL, XXL

Sizes: S, M, L, XL, XXL

Labcoat, Style L600
NyloStat® labcoat, with snap front, one chest pocket, two lower pockets, snap adjustment at wrists, side entry slits.

Frock, Style L610
StaticSorb® frock with Delrin® zipper front, electrostatic dissipative knit cuffs.

Labcoat, Style L620
StaticSorb® labcoat, with button front, one chest pocket, two lower pockets, side entry slits.

Apron, Style M990
StaticSorb® bib apron with two pockets, bound edges.

Sizes: S, M, L, XL, XXL

Sizes: S, M, L, XL, XXL

Sizes: S, M, L, XL, XXL

Sizes: One Size

Hood, Style M871
StaticSorb® hood, snaps for facemask attachment, vertical and horizontal snap adjustment on back for proper fit, double lapped felled seams, gripper close on cape.

Bouffant Cap, StyleM861
StaticSorb® bouffant cap.

Cap, Style M840
StaticSorb® cap, plastic size adjust tab, soft visor, bound seams. 

Boots, Style M880
StaticSorb® 18" boot, static dissipative molded vinyl sole, adjustable strap across instep and around ankle, elastic top.

Sizes: One Size

Sizes: One Size

Sizes: One size, adjustable

Sizes: One Size

Facemask, Style M999
Tricot® facemask for M871. Adjustment snaps for proper fit.

StaticSorb® Physical Data

StaticSorb®
C3

StaticSorb®
AMD Stripe

Weave

Plain

Plain

Yarn Type

High Density

Microdenier

Weight (ounces per square yard)

2.8

3.7

StaticSorb® Test Data

StaticSorb®
C3

StaticSorb®
AMD Stripe

Paint Bleed Through

<0.2

0.2

Paint Gain in Grams (30 sec)

<0.3

<0.3

Air Permeability / ASTM D-737
(Cubic Feet per Minute/Square Foot)

>=2.5

>=11

Particle Filtration Efficiency / IES RP-CC-003.2
(Percent Removal at 5 Microns)

>=90%

>=90%

Moisture Vapor Transmission Rate / ASTM E-96
(Grams / Meter2/24 Hours at 73°F, 50% RH)

>1500

>1500

Roughing and Pilling / ASTM D3512 Modified
(Subjective Rating Scale 0.5 - 5.0)

>=4.0

>=4.0

Static Decay Time (seconds - positive charge) (Federal Standard 101C/4046 Charge Decay Time in Seconds measures how fast a charge will dissipate from a fabric)

>0.01

>0.01

Static Decay Time (seconds - negative charge)
(Federal Standard 101C/4046 Charge Decay Time in Seconds measures how fast a charge will dissipate from a fabric)

>0.01

>0.01